This application has been popular for a number of years and is designed to stand on the ground close to the pump. As shown in the photograph, the Flowmeter is built into a robust, lightweight frame giving protection from accidental damage. 

It is fitted with 4” Bauer Couplings as standard (other options available) and 6mtrs of 12volt power cable with an international 3 pin plug.          

This display can be remotely wired into the tractor where it can be constantly monitored.  When the tractor and pump are separated it can be easily unplugged and the display remains with the tractor.  

• Factory calibrated for accuracy
• Worldwide product
• Built into a robust galvanized frame
• Components can be used for upgrading
• Economical start-up unit for farmer and contractor alike

This application is similar to the In-Line version but is built into the pipework of the Slurry Applicator, either Splashplate or Dribble Bar. All Slurrykat spreading equipment can be manufactured with the appropriate flanges to facilitate the Flowmeter as shown in the photograph (left).

The remote head can be used in the cab in the same way and is connected by a standard data cable.

The whole installation can be upgraded to use a computerized in-cab display as described later. The unit only needs to be reprogrammed.

This is a comprehensive in cab computer which reads the information from the Flowmeter and translates it into a number of readout options, having gained additional information from wheel speed, radar and implement sensors.

The operator is given a visual display of all the information which can be printed or downloaded against a specific customer or field reference. This information includes application rates, area covered, tractor speed, time and date started and finished.

It will hold up to 50 different tasks or customer details at any one time. Any one of these tasks can be suspended and returned to at a later date. The computer is easily programmed and is user friendly. It will be fully installed by our staff and training given on its use.

These Flowmeters are ideal for use in remote situations where no power is available.Has its own built in battery with a life expectancy of six years.
This Flowmeter can be built into a manhole in the ground and needs no maintenance or attention and will switch on and off automatically.

Technical Specification Summary

• Sizes: from DN50 (2”) to DN300 (12”)
• Electrodes: 316Ti (1.4571)
• Functions: 3 totalisers, flow rate, real time clock, alarm handling, power management, data logging, automated data backup, alarm and call-up.
• Flow Unit: Volume as M³ and Flow rate as M³/h
  
  
  

This unit replaces the need for wheel magnets and sensors for those tractors that are not fitted with radar.

• Easily fitted in minutes
• Wired directly into the LH5000 In-cab computer
• Replaces the need for wheel sensors
• Installation kit includes roof aerial and all wiring

Heavy duty plastic cover for Siemens Flowmeter display. Delicate electronic equipment can become contaminated with slurry and moisture.
On a number of occasions last summer the displays faded in the bright sunlight resulting in expensive repair bills. This cover helps prevent such damage.

• Protects against water ingress and bright sunlight
• Easily cut to shape to suit individual needs
• UV Resistant
• Helps to protect sensitive equipment against accidental knocks
• Allows for hosing off equipment
• Lifts off easily to read display
• Acts as a deterrent against vandalism or interference

This is a typical printer which can be installed in the tractor cab and powered direct from the LH5000 via the download connecting lead supplied.

• Easily upgrades from basic in line system utilising existing equipment
• Proven product quality and reliability
• User friendly
  

Various sizes to suit all Flowmeter applications and assorted combinations.

Flanges to suit all applications and steel pipe cut to fit.

A full range of electrical connections and fittings to suit all Flowmeter installation requirements and repairs.

Weld-on and conventional.

Designed as a mobile phone holder for in tractor cab use, but is easily adapted to hold the in-cab display unit.

Made to suit your requirements. Enables the transfer of data from the LH500 In-cab computer to your laptop or office PC.
Data can then be printed or stored.